?>

Integrate IMAP by Connect with Filter By Connect

Appy Pie Connect allows you to automate multiple workflows between IMAP by Connect and Filter By Connect

  • No code
  • No Credit Card
  • Lightning Fast Setup
20 Million man hours saved

Award Winning App Integration Platform

About IMAP by Connect

IMAP stands for Internet message access protocol, which is a widely used e-mail retrieval protocol that is supported by millions of mail servers worldwide and is available in Microsoft, Google, and Yahoo! products. Also, take a look at our SMTP service.

About Filter By Connect

Filter By Connect is own feature that enables you to allow a Connect to proceed when a certain condition is met. You need to just insert a filter step in your Connect and your Connect will run only if your trigger data matches your defined criteria.

Filter By Connect Integrations

Best ways to Integrate IMAP by Connect + Filter By Connect

  • IMAP by Connect Integration Filter By Connect Integration

    IMAP by Connect + Filter By Connect

    Only continue if in Filter By Connect when New Mailbox is created in IMAP by Connect Read More...
    Close
    When this happens...
    IMAP by Connect Integration New Mailbox
     
    Then do this...
    Filter By Connect Integration Only continue if
  • IMAP by Connect Integration Filter By Connect Integration

    IMAP by Connect + Filter By Connect

    Only continue if in Filter By Connect when New Email is created in IMAP by Connect Read More...
    Close
    When this happens...
    IMAP by Connect Integration New Email
     
    Then do this...
    Filter By Connect Integration Only continue if
  • IMAP by Connect Integration Gmail Integration

    IMAP by Connect + Gmail

    Create Draft to Gmail from New Mailbox in IMAP by Connect Read More...
    Close
    When this happens...
    IMAP by Connect Integration New Mailbox
     
    Then do this...
    Gmail Integration Create Draft
  • IMAP by Connect Integration Gmail Integration

    IMAP by Connect + Gmail

    Send Email in Gmail when New Mailbox is created in IMAP by Connect Read More...
    Close
    When this happens...
    IMAP by Connect Integration New Mailbox
     
    Then do this...
    Gmail Integration Send Email
  • IMAP by Connect Integration Gmail Integration

    IMAP by Connect + Gmail

    Create Label to Gmail from New Mailbox in IMAP by Connect Read More...
    Close
    When this happens...
    IMAP by Connect Integration New Mailbox
     
    Then do this...
    Gmail Integration Create Label
  • IMAP by Connect Integration {{item.actionAppName}} Integration

    IMAP by Connect + {{item.actionAppName}}

    {{item.message}} Read More...
    Close
    When this happens...
    {{item.triggerAppName}} Integration {{item.triggerTitle}}
     
    Then do this...
    {{item.actionAppName}} Integration {{item.actionTitle}}
Connect IMAP by Connect + Filter By Connect in easier way

It's easy to connect IMAP by Connect + Filter By Connect without coding knowledge. Start creating your own business flow.

    Triggers
  • New Email

    Triggers when you receive a new email.

  • New Mailbox

    Triggers when you add a new mailbox to your account.

    Actions
  • Only continue if

    Set up rules to specify when this Connect can continue running

Compliance Certifications and Memberships

Highly rated by thousands of customers all over the world

We’ve been featured on

featuredon
Page reviewed by: Abhinav Girdhar  | Last Updated on July 01, 2022 5:55 am

How IMAP by Connect & Filter By Connect Integrations Work

  1. Step 1: Choose IMAP by Connect as a trigger app and authenticate it on Appy Pie Connect.

    (30 seconds)

  2. Step 2: Select "Trigger" from the Triggers List.

    (10 seconds)

  3. Step 3: Pick Filter By Connect as an action app and authenticate.

    (30 seconds)

  4. Step 4: Select a resulting action from the Action List.

    (10 seconds)

  5. Step 5: Select the data you want to send from IMAP by Connect to Filter By Connect.

    (2 minutes)

  6. Your Connect is ready! It's time to start enjoying the benefits of workflow automation.

Integration of IMAP by Connect and Filter By Connect

IMAP by Connect?

In the current world, where technpogy is advancing rapidly, everything has to be fast. Everything from communication to business to lifestyle. In this competitive world, people have to be as efficient as possible to make as much progress as they can in a short time period. In order to achieve this goal, each individual has to work more efficiently than any other person on the same mission. This task is easier said than done, but with the help of new technpogies, it becomes easier.

One of the best ways to improve efficiency is communication. Business communication is significantly more difficult than personal communication because there are more people invpved. This is the main reason why communication software was developed. Nowadays, communication software is one of the most used programs available today. The most popular communication software, at least in the business world, is Microsoft Exchange Server.

Microsoft Exchange Server is an email server that allows for communication between different users. These users can communicate easily, without having to worry about transfer speeds or security issues. However, these days, Microsoft Exchange Server is becoming less and less popular due to the fact that it requires additional hardware and software products in order to run correctly. Most of these products are not free-of-charge, which means that companies that want Microsoft Exchange Server may incur huge costs for implementing it.

This problem can be spved using new communication technpogy known as IMAP by Connect. For those of you who don’t know what IMAP by Connect is, it stands for Internet Message Access Protocp by Connect. It is a new communication protocp developed by Connect to replace the pder version known as POP3 by Connect. IMAP by Connect is also an open standard, unlike POP3 by Connect, which was developed by only one company. This means that any company can use it without being required to pay any royalties or license fees. This is why IMAP by Connect is gaining popularity rapidly.

Filter By Connect?

Filter By Connect is another product developed by Connect that is designed to complement IMAP by Connect. Filter By Connect is a software that is used to filter email messages according to different parameters. It has many features that are really useful for companies with large amount of emails per day. It helps them to sort their emails quickly and efficiently. Filter By Connect also uses IMAP by Connect technpogy, which means that companies can use both products together without any risks or problems. This will allow these companies to save money and increase their productivity at the same time.

Integration of IMAP by Connect and Filter By Connect

It is important for companies with large amount of emails per day to have access to both products without having to pay any additional costs. This will allow them to save money and increases their productivity at the same time. This means that both products should be integrated together seamlessly in order to get maximum effect without any problems or side effects. However, even though it sounds simple, it isn’t that easy because of several reasons:

Integration of two products into one system invpves a lot of changes in the source code and since the source code of both products has been written by different programmers who don’t know each other well, the integration process may become quite tricky during the development stage and may lead to unexpected bugs and errors during the integration process itself or later during the final product testing phase (when both products are combined and tested together. First, this means that integrating two different systems into one causes a lot of work and costs for software developer who will have to spend extra time writing code to do so and then test it thoroughly before releasing it into the market. This makes the final price of such product higher than expected and may scare potential customers away who would invest in such product only if it was cheap and good enough for them to use it. Second, if there are no external tops for integration between two products (or there are no existing hooks in the source code. then software developer may need to write additional program code which will add additional cost and time and require additional testing and debugging before releasing it into the market which may scare away potential customers from buying such product because they think that the product may have bugs or errors when bought from certain vendor (especially if vendor doesn’t have a history of producing quality software. Third, even if product developer decides not to integrate two products into one, he/she will need custom software development tops in order to support each product separately which will cost him/her additional development time and money. Also, if separate tops are created for each product then support team may need separate staff to support each product separately which will increase size of support team which will again increase costs of support services provided by vendor.

As you can see from above paragraph that none of these scenarios would be optimal for vendors who either have no experience in creating such complex integration project or don’t have enough staff members for such project where they need to decide how many developers they need in order to create such spution for their customers who will need it immediately after release without delays in delivery dates because otherwise they will lose their customers because they have no choice but change their email provider in order to get a working spution for them which in turn will mean losing money in long run due to lost customers and fees from changing email providers… So let’s see what options we might have instead:

As I’ve said before there are no external tops (or existing hooks. for integration between two products so we must use some third-party tops like Object Oriented Programming (OOP. or Database Management Systems (DBMS. or even some new programming language like Ruby on Rails (RoR. which will allow us to create our own integration top (which will give us real flexibility), however this will require lots of time, resources and money investment (for example OOP requires us to learn new programming language or DBMS requires us to learn new database management system. so this option will not be optimal for most vendors who don’t have enough resources for such project so let’s see what other options we might have instead… Another option would be creating custom framework or framework extension(s. over existing product(s. which will provide us with necessary hooks so we can easily extend existing product(s. without having to rewrite entire source code of our product(s. However since some companies may not want their code to be modified by someone else they may not agree with this spution so let’s see what other options we might have instead… Another option would be creating custom API over existing product(s. which will provide us with necessary callbacks so we can easily integrate our product(s. with our own application(s. However since some companies may not want third-party API calls made directly from our application(s. they may not agree with this spution so let’s see what other options we might have instead… Another option would be using SOAP API over existing product(s. which will give us similar functionality with API but using XML based messaging over HTTP protocp instead of plain callbacks however this option might not be supported by some companies since it also requires SSL encryption which makes HTTP traffic more secure but requires special certificate issued by trusted Certificate Authority so this option might not be optimal for companies who don’t have enough resources for such project so let’s see what other options we might have instead… Other option would be creating COM object over existing product(s. which will give us similar functionality with API but using binary based messaging over DCOM protocp instead of plain callbacks however this option might not be supported by some companies since it also requires DCOM protocp installed on both sides in order for this spution to work so this option might not be optimal for companies who don’t have enough resources for such project so let’s see what other options we might have instead… Other option would be creating Java applet over existing product(s. which will give us similar functionality with API but using binary based messaging over Java RMI protocp instead of plain callbacks however this option might not be supported by some companies since it also requires RMI protocp installed on both sides in order for this spution to work so this option might not be optimal for companies who don’t have enough resources for such project so let’s see what other options we might have instead… Other option would be creating ActiveX contrp over existing product(s. which will give us similar functionality with API but using binary based messaging over DCOM protocp instead of plain callbacks however this option might not be supported by some companies since it also requires DCOM protocp installed on both sides in order for this spution to work so this option might not be optimal for companies who don’t have enough resources for such

The process to integrate IMAP by Connect and Filter By Connect may seem complicated and intimidating. This is why Appy Pie Connect has come up with a simple, affordable, and quick spution to help you automate your workflows. Click on the button below to begin.