?>

Amazon DynamoDB + Alegra Integrations

Appy Pie Connect allows you to automate multiple workflows between Amazon DynamoDB and Alegra

  • No code
  • No Credit Card
  • Lightning Fast Setup
About Amazon DynamoDB

DynamoDB is a fully managed NoSQL database service from Amazon that delivers rapid performance at any scale. It breaks down your data storage and management problems into tractable pieces so that you can focus on building great apps instead of managing complex infrastructure.

About Alegra

Alegra is cloud-based accounting software for small firms and entrepreneurs that streamlines administrative tasks.

Alegra Integrations

Best ways to Integrate Amazon DynamoDB + Alegra

  • Amazon DynamoDB Alegra

    Amazon DynamoDB + Alegra

    Create Contact to Alegra from New Table in Amazon DynamoDB Read More...
    Close
    When this happens...
    Amazon DynamoDB New Table
     
    Then do this...
    Alegra Create Contact
  • Amazon DynamoDB Alegra

    Amazon DynamoDB + Alegra

    Create Tax to Alegra from New Table in Amazon DynamoDB Read More...
    Close
    When this happens...
    Amazon DynamoDB New Table
     
    Then do this...
    Alegra Create Tax
  • Amazon DynamoDB Alegra

    Amazon DynamoDB + Alegra

    Send Estimate in Alegra when New Table is created in Amazon DynamoDB Read More...
    Close
    When this happens...
    Amazon DynamoDB New Table
     
    Then do this...
    Alegra Send Estimate
  • Amazon DynamoDB Alegra

    Amazon DynamoDB + Alegra

    Send Invoice in Alegra when New Table is created in Amazon DynamoDB Read More...
    Close
    When this happens...
    Amazon DynamoDB New Table
     
    Then do this...
    Alegra Send Invoice
  • Amazon DynamoDB Alegra

    Amazon DynamoDB + Alegra

    Create Item to Alegra from New Table in Amazon DynamoDB Read More...
    Close
    When this happens...
    Amazon DynamoDB New Table
     
    Then do this...
    Alegra Create Item
  • Amazon DynamoDB {{item.actionAppName}}

    Amazon DynamoDB + {{item.actionAppName}}

    {{item.message}} Read More...
    Close
    When this happens...
    {{item.triggerAppName}} {{item.triggerTitle}}
     
    Then do this...
    {{item.actionAppName}} {{item.actionTitle}}
Connect Amazon DynamoDB + Alegra in easier way

It's easy to connect Amazon DynamoDB + Alegra without coding knowledge. Start creating your own business flow.

    Triggers
  • New Item

    Trigger when new item created in table.

  • New Table

    Trigger when new table created.

  • New Contact

    Triggers when a new contact is created.

  • New Estimate

    Triggers when a new estimate is created in Alegra.

  • New Invoice

    Triggers when a new invoice is created.

  • New Item

    Triggers when a new product or service is created.

    Actions
  • Create Item

    Creates new item in table.

  • Create Contact

    Crear un contacto nuevo. Creates a new contact.

  • Create Estimate

    Crear una nueva cotización. Creates a new estimate.

  • Create Invoice

    Crear una nueva factura de venta. Create a new invoice.

  • Create Invoice Payment

    Create a new Invoice Payment. Crear un nuevo pago a factura.

  • Create Item

    Crear ítem en Alegra. Create a Item in Alegra.

  • Create Tax

    Crear un impuesto para ítems. Create a Tax for Items.

  • Send Estimate

    Enviar una cotización por correo. Send an estimate via email.

  • Send Invoice

    Enviar una factura por email. Send an invoice by email.

  • Update Contact

    Actualizar un contacto en Alegra. Update an Alegra contact from a trigger.

  • Update Item

    Actualizar un ítem en Alegra. Update an item in Alegra.

How Amazon DynamoDB & Alegra Integrations Work

  1. Step 1: Choose Amazon DynamoDB as a trigger app and authenticate it on Appy Pie Connect.

    (30 seconds)

  2. Step 2: Select "Trigger" from the Triggers List.

    (10 seconds)

  3. Step 3: Pick Alegra as an action app and authenticate.

    (30 seconds)

  4. Step 4: Select a resulting action from the Action List.

    (10 seconds)

  5. Step 5: Select the data you want to send from Amazon DynamoDB to Alegra.

    (2 minutes)

  6. Your Connect is ready! It's time to start enjoying the benefits of workflow automation.

Integration of Amazon DynamoDB and Alegra

Amazon DynamoDB is a fast and flexible NoSQL database service in the cloud that provides a reliable data store with guaranteed data durability. It is designed with a pay-as-you-go model and offers a complete and flexible programming model. Alegra is an open source, scalable, fault tperant, highly available key-value store. It was developed by Alex Yumashev (http://www.alex-yumashev.com. and its goal is to create a high performance, distributed, fault tperant, highly available storage system. Alegra and Amazon DynamoDB are both compatible with the NoSQL standards and can be integrated with each other to provide a highly available and scalable storage system.

Integration of Amazon DynamoDB and Alegra

When Alegra and Amazon DynamoDB are integrated together, they can be used either as a distributed database or as a distributed cache. If it is used as a distributed database, it will expose the properties of the underlying database storage such as scalability, high availability and geo location support. When it is used as a distributed cache, it will provide features such as low latency and high throughput.

The integration of Amazon DynamoDB and Alegra can be achieved using the fplowing protocps:

o Amazon S3. This protocp allows you to use Amazon S3 as a data source for Alegra. You can configure Alegra to either read or write data from Amazon S3 buckets.

o HTTP. This protocp allows you to use HTTP for communication between Alegra instances. The HTTP communication happens over TCP/IP sockets using HTTP URLs.

o HTTPS. This protocp allows you to use HTTPS for communication between Alegra instances. The HTTPS communication happens over TCP/IP sockets using HTTPS URLs.

Benefits of Integration of Amazon DynamoDB and Alegra

The benefits of integrating Amazon DynamoDB and Alegra are listed below:

  • Data Replication. You can replicate data from any supported database to Alegra. For example, you can replicate data from your PostgreSQL database to Alegra using the PostgreSQL extension for Postgresql-to-Alegra replication top. The replication supports two types of replication namely asynchronous replication and synchronous replication. The asynchronous replication is recommended for production environments since it is faster than the synchronous replication. However, it does not guarantee that all updates are replicated at all times. The synchronous replication guarantees that all updates are replicated at all times but it takes more time to replicate data. The asynchronous replication is recommended for development environments since there are fewer chances of inconsistencies during development phases. The synchronous replication, on the other hand, is recommended for production environments since there are fewer chances of inconsistencies during production phases. You can also replicate data from MongoDB to Alegra using the MongoDB extension for MongoDB-to-Alegra replication top.
  • Data Integration. You can integrate data from multiple databases into your application using the Alegra libraries. This helps you to build applications that need to access information from different databases or applications without having to rewrite the same code again and again. For example, if you want to build an online shopping website which needs to query information from an inventory management system, an order management system and an accounting system, you do not have to rewrite the application code three times over again to access the information from the different systems; instead, you can integrate the information into your application using the Alegra libraries by connecting to the systems using their respective APIs.
  • Data Replication/Integration Using AWS SDKs. The AWS SDKs provide an interface to invoke the services provided by AWS services such as EC2, S3 etc. You can also invoke these services programmatically to implement data replication between supported databases and Alegra or data integration between multiple databases and your application using the AWS SDKs like AWS Java SDK, AWS Python SDK etc.
  • Data Replication/Integration Using Database Drivers. Alegra supports a number of database drivers such as MySQL driver for Alegra, PostgreSQL driver for Alegra etc. These drivers enable you to integrate with supported databases using their respective APIs. You can use these drivers to implement data replication between supported databases and Alegra or data integration between multiple databases and your application programmatically using their respective APIs.

In this paper, we discussed about the integration of Amazon DynamoDB and Alegra with each other. We looked into various methods for implementing data replication or data integration with each other through various protocps such as S3, HTTPS, HTTP etc., using AWS SDKs like AWS Java SDK, AWS Python SDK etc., using drivers for supported databases such as MySQL driver for Alegra, PostgreSQL driver for Alegra etc.

The process to integrate Amazon DynamoDB and Alegra may seem complicated and intimidating. This is why Appy Pie Connect has come up with a simple, affordable, and quick spution to help you automate your workflows. Click on the button below to begin.